home *** CD-ROM | disk | FTP | other *** search
/ Shareware Overload Trio 2 / Shareware Overload Trio Volume 2 (Chestnut CD-ROM).ISO / dir34 / spkt465s.zip / READTHIS.TXT < prev    next >
Text File  |  1993-09-02  |  31KB  |  790 lines

  1.  
  2.                         S P E E D K I T
  3.  
  4.                                BY
  5.  
  6.                         H Y P E R W A R E
  7.  
  8.         Welcome to HyperWare's SpeedKit Version 4.65
  9.  
  10.  
  11. ------------------------------------------------------------------------------
  12.  
  13. Windows Users, make sure not to use the HyperDisk defaults.  The optimum
  14. settings for HyperDisk and Windows is to use between 1/4 and 1/2 of your
  15. memory and stagged writes.  To do this you must use the C:nnnn parameter
  16. and the S parameter.  If you are running the install program to install
  17. HyperDisk, just enter in an amount of memory, don't accept the default, and
  18. when it asks you for options add the letter S to the option line.  This will
  19. make Windows run a whole lot better.
  20.  
  21. DoubleSpace, XtraDrive, Stacker and SuperStor users!  The answer is YES,
  22. HyperDisk will work with these compression products.
  23.  
  24. ------------------------------------------------------------------------------
  25.  
  26. "Get Rid of SmartDrive...still can't match that lightning-fast old shareware
  27.  standby HyperDisk"
  28.  
  29. PC World January 1993, Pg. 122
  30.  
  31. ------------------------------------------------------------------------------
  32.  
  33.      ___________ Release Contents______________
  34.  
  35. CONTENTS:
  36.  
  37. READTHIS.COM     This file
  38. INSTALL  BAT     Installs HyperDisk and HyperKey
  39. ORDERFRM DOC     Order/Registeration Form
  40. HYPER286 EXE     HyperDisk for 80286 Extended Memory
  41. HYPER386 EXE     HyperDisk for 80386 Extended Memory
  42. HYPERDK  EXE     Post-Install Command Processor
  43. HYPERDKC EXE     HyperDisk for Conventional Memory
  44. HYPERDKE EXE     HyperDisk for EMS memory
  45. HYPERDKX EXE     HyperDisk for Generic Extended Memory
  46. HYPERSTB EXE     Pre-Install Binder for HyperDisk
  47. HYPERKEY EXE     HyperKey
  48. HYPERSCR EXE     HyperScreen
  49. INST_DSK EXE     HyperDisk installer
  50. INST_KEY EXE     HyperKey installer
  51.  
  52.  
  53.   +++++++++++++++++++++++++++++++++++++++++++++++++++
  54.  
  55.                   HyperWare's Upgrade Policy
  56.  
  57. All HyperWare products may be upgraded via HyperWare's BBS free of charge
  58. for a period of one year from the date of purchase. Thereafter, a BBS upgrade
  59. subscription may be purchased for a nominal fee of $10.00 (US) per year.
  60. At any time a new program diskette and manual may be obtained for $10.00 (US).
  61.  
  62.  
  63. Prices and terms subject to change without notice.
  64.  
  65.  
  66. Once again, Thank You for using HyperWare's products.
  67.  
  68.   +++++++++++++++++++++++++++++++++++++++++++++++++++
  69.  
  70.  
  71.   09/02/93   SpeedKit 4.65 Release
  72.  
  73.  
  74.                           Overall Changes
  75.  
  76.   - Installer. HyperWare SpeedKit now has an integrated one piece installer
  77.     that is far better than the old batch file routines to install
  78.     SpeedKit. We are continuing to improve this program and any feedback is
  79.     welcome.
  80.  
  81.                        Changes to HyperDisk
  82.  
  83.   - Support for XtraDrive 3.0 drive compression.
  84.  
  85.   - Bug fixes for DoubleSpace
  86.  
  87.   - Default memory usage is now 1/2 of available system memory, not all
  88.     available memory.
  89.  
  90.  
  91.  
  92.                        Changes to HyperKey
  93.  
  94.   - HyperKey is now on the same numbering system as HyperDisk, this release
  95.     will be 4.65 of HyperKey.
  96.  
  97.  
  98.   - M:±  Enable/disable SmartCaps(tm).  Default is disabled.
  99.          Capslock is automatically turned off when a shift key is pressed,
  100.          simulating the actions of a typewritter. No action if the [Ctrl]
  101.          and/or [Alt] keys are also pressed.
  102.  
  103.  
  104.  
  105.                       Changes to HyperScreen
  106.  
  107.   - HyperScreen is now on the same numbering system as HyperDisk, this
  108.     release will be 4.65 of HyperScreen.
  109.  
  110.   - M:±     Detect mouse for screen unblanking.  Default is enabled.
  111.             Screen unblanks if the mouse is moved or a button is pressed.
  112.  
  113.   - W:±     This switch is no longer supported.  Hyperscr is always
  114.             disabled when Windows is executed and renabled when Windows
  115.             terminates.
  116.  
  117.  
  118.  
  119.   ___________ HyperDisk Release Changes______________
  120.  
  121.   04/04/93  HyperDisk 4.60 Release
  122.  
  123. * Released to coincide with release of MS DOS 6.0 to fully support Double Space
  124.   on all configurations.
  125.  
  126.   03/21/93  HyperDisk 4.53 BETA A Release
  127.  
  128. * Fixed Support for DOS 6 DoubleSpace Compression
  129. * Default Memory usage is now always 1/2 avaialable not all
  130.  
  131.   01/18/93  HyperDisk 4.52 Release
  132.  
  133. * fixed shareware panels with new phone numbers
  134.  
  135.   11/15/92  HyperDisk 4.51 Release
  136.  
  137. * fixed shareware panels with new phone numbers
  138.  
  139.   11/06/92  HyperDisk 4.50 Release
  140.  
  141.   09/30/92  HyperDisk V4.33ßF test release
  142.  
  143. * Added DOS Critical Section calls for Novell Lite 1.1
  144.  
  145.   09/19/92  HyperDisk V4.33ßD test release
  146.  
  147. * Add /KA option to enable Windows 3.0+ flush on beginning of Windows exit.
  148.   /KA:- is default. To test this switch add /KA to the inatallation line.
  149.  
  150.   09/17/92  HyperDisk V4.33ßD test release
  151.  
  152. * Add DOS Kernel Critical Section Support (Novell Lite problems)
  153.  
  154. * Add write modified cache data when Windows begins exit (VDMA problems with
  155.   Bus Master adapters)
  156.  
  157.   08/25/92  HyperDisk V4.33ßC test release
  158.  
  159. * Skip Windows 3.0+ automatic memory resizing if cache size is already
  160.   below desired memory size.
  161.  
  162. * Disable Report Display except when no parameters are provided. To restore
  163.   the original method specify: /OX:-
  164.  
  165.   08/21/92  HyperDisk V4.33ßB test release
  166.  
  167. * Rework memory reallocation test to avoid errors in some memory managers.
  168.  
  169. * Skip Windows 3.0+ automatic memory resizing if cache size is already
  170.   below desired memory size.
  171.  
  172. * Added drive specific Staged Write control. /S:nn allows Staged Write on hard
  173.   drive nn. /W:nn forces all data to be written through immediately to drive
  174.   nn. Floppy drives also support drive specific Staged Write control. /A:nn
  175.   allows Staged Write on Floppy drive nn. /Q:nn forces floppy drive nn data to
  176.   be written immediately. Default is All drives allowed for Staged Write.
  177.  
  178. * Fixed problem with Non-XMS Extended memory configurations.
  179.  
  180. * Add "UPS ON!" item to Status Display when UPS is active.
  181.  
  182.   07/30/92  HyperDisk V4.33ßA test release
  183.  
  184. * Add HyperDisk Application Program Interface (API). See HyperApi.txt for
  185.   details.
  186.  
  187. * Add Uninterruptable Power Supply (UPS) monitor. See HyperUps.txt for
  188.   details.
  189.  
  190. * Add cache buffer update completion tone. /KF enables tone after every cache
  191.   update completion of all modified buffers. /KF:- disables tone. /KF:- is
  192.   default.
  193.  
  194. * Add cache update reordering option. /KH selects hard drives to update first.
  195.   /KH:- selects floppys drives to update first. /KH is default.
  196.  
  197. * Change method to remove previous floppy diskette image from the cache. New
  198.   method will remove floppy diskette image when the media is changed. The
  199.   volume serial number and FAT areas are no longer checked. /KC selects
  200.   simple media change required to remove previous floppy disk image.
  201.   /KC:- restores previous method; checks track zero to determine if diskettte
  202.   is different.  /KC is default.
  203.  
  204. * Add Buffers in Use count in Status Display. The "Buffers in Cache" field has
  205.   been extended to display first,the total number of buffer and second,the
  206.   number of buffer in use currently.
  207.  
  208. * Fixed a problem with HYPERDKC.EXE model that caused hangups on some machines.
  209.  
  210. _______________        ______________________________        _______________
  211.  
  212.   05/01/92  HyperDisk V4.32 release
  213.  
  214. * Fix memory resizing problem (/CW:nnn) while running with Windows 3.1.
  215.   Windows 3.1 changed the startup and shutdown procedures, this version works
  216.   correctly with these new conditions.
  217.  
  218. * Add alternate Windows 3.0/3.1 memory resizing method. Two new command are
  219.   supported. /CB:nnn sets the minimum base free memory for Windows.
  220.   Default is 512K bytes.  /CP:nn sets the percent free memory to be used by
  221.   HyperDisk. Default 35%. Setting /CW:nnn disables this automatic method.
  222.  
  223.   Example: Your machine has 6098K of Extended memory. HyperDisk under DOS
  224.   uses 4096K. When Windows starts up HyperDisk frees the 4096K and request
  225.   the total free memory size; now 6098K. HyperDisk then subtracts the base
  226.   free memory size (Default 512K) for a result of 5585K and takes 35% to
  227.   obtain 1954K as the new HyperDisk cache size. (Actual Cache value will be
  228.   rounded  down to the nearest integer multiple of the buffer size (Denoted
  229.   as Sectors/Buffer).
  230.  
  231. * Fixed uninstall problem when operating with QEMM386 Stealth mode active.
  232.  
  233. * Disable QEMM386's Stealth Mode advanced disk/diskette support  when operating
  234.   with Windows 3.0/3.1.
  235.  
  236. * Allow memory resizing (/XD, /XA, and XC commands) while running under
  237.   DesqView.
  238.  
  239. * Added Stacker and SuperStor detection to eliminate installation order
  240.   requirements. However, when the entire disk is compressed and no part
  241.   of the non-commpressed disk is accessable you will have to load HyperDisk
  242.   in the CONFIG.SYS file before Stacker or SuperStor to cache the drive.
  243.  
  244.  
  245. * Added check to prevent write cacheing Hard Disk Boot area. Some Anti-Virus
  246.   programs issue errors if this area is write-cache-delayed.
  247.  
  248. * Added additional test for Primary DMA type controllers (i.e. Adaptec 154xB)
  249.  
  250. * Changed XMS memory block locking default. HyperDisk now locks the XMS memory
  251.   block as was previously done in versions 4.21 and earlier. Added /XML switch
  252.   to change XMS memory block locking. XML or XML:+ locks XMS block (default);
  253.   XML:- unlocks XMS memory block. Some XMS providers and/or applications alter
  254.   HyperDisk's XMS memory block if it is unlocked. (DR-DOS 6.0's EMM386 and an
  255.   early Lotus 123-R3 release revealed this problem. Locking the block prevents
  256.   these bugs from destroying the cache memory buffer.)
  257.  
  258. * Added additional XMS diagnostic display information.
  259.  
  260. __________________________________________________________________
  261.  
  262.   01/10/92  HyperDisk V4.31 release
  263.  
  264. * Add update modified buffer when DOS DISK RESET (INT 21, 0Dh) is called.
  265.   /KD:- will enable update. /KD default.
  266.  
  267. * Fix timing problem with Advanced Updateing when operating under
  268.   QEMM386 Stealth Mode.
  269.  
  270.   11/22/91  HyperDisk V4.30 release
  271.  
  272. * Correct minor problem with floppy write caching.
  273.  
  274. * Automatic QEMM 6.0 Stealth support. Set VI:- to disable.
  275.  
  276. * Fixed problem with DesqView Exit operation.
  277.  
  278. * Reworked Interrupt 09 (Keyboard) logic to prevent cursor
  279.   key problems while still handling reboot <Ctrl><Alt><Del> detection.
  280.  
  281. * Fix problem with HIMEM.SYS late INT 15-88 intercept being
  282.   bypassed.
  283.  
  284. * Add additional verify operations when is verify enabled.
  285.  
  286. * Make XS and XSL inactive if loaded high with external loader
  287.   (i.e. devicehigh, loadhi, etc.)
  288.  
  289. * Changed floppy handling with Disk Manager (OMTI) systems.
  290.  
  291. * Fix floppy media change problem after BIOS verify!
  292.   Fixes Safe Format problem and DOS 5.00 Setup/Format problem, et. al.
  293.  
  294. * Altered read ahead logic to improve handling of bad sectors.
  295.  
  296. * Fixed problem with linear read perdictor.
  297.  
  298. * Changed XMS Lock/Unlock method to lock on direct transfers only, otherwise
  299.   block is always unlocked.
  300.  
  301. *  Fix HYPERDK.EXE staying resident sometimes!
  302.  
  303. * Additional changes for IDE drive compatibility.
  304.  
  305.   _______________________________
  306.  
  307.  
  308.   04/22/91  HyperDisk V4.21 release
  309.  
  310. * Add option to disable the floppy change notice tone. Select /KT to disable
  311.   the change tone.
  312.  
  313. * Automatic detection of Sumo Systems SCSI BIOS to prevent hangup due to
  314.   faulty Sumo BIOS function limit test.
  315.  
  316. * Add detection of End Of File (EOF) mark in command files (/XF:file).
  317.   Fixes problem with WordStar text files.
  318.  
  319. * Fix HyperStb lockup problem with SpedStor detection.
  320.  
  321. * Change HyperDisk action call drive ID value. Fixes some IDE problems.
  322.  
  323. * Add code to allow use of Pre-Allocated XMS/EMS memory via XM:handle_num
  324.  
  325. * Fix XSL report message to display correct segment address.
  326.  
  327. * Restore Uninstall (/XU) in Shareware version. Use HYPERSTB.EXE for best
  328.   results. Install HYPERSTB.EXE in the CONFIG.SYS file, install HyperDisk
  329.   in the  AUTOEXEC.BAT file.
  330.  
  331. * Relax Chips & Tech. presence test. Fixes some 212 Neat and 302 problems.
  332.  
  333. * Fixed Disk Manager and SpeedStor configuration problem. Regression error
  334.   in version 4.20.
  335.  
  336. * Fixed Advanced Update interlock problem.
  337.  
  338. * Change XMS free memory determination. XMS-HMA area was being reserved
  339.   twice.
  340.  
  341. * Revise vector reset code for soft-boot.
  342.  
  343. * New interlock method for Network severs, Desqview, Windows 3.0, etc.
  344.  
  345. * Revised EMS 3.2/4.0 testing and selection procedure. XT forces 4.0
  346.  
  347. * Add addition messages for C&T 82C212 configuration errors.
  348.  
  349.                  _______________________________
  350.  
  351.                   HyperDisk and Windows 3.0/3.1
  352.  
  353. HyperDisk gives you a true high-performance cache with the Win3 compatibility
  354. of SmartDrive.
  355.  
  356. Load HIMEM.SYS (or QEMM 5.10+, 386Max) before HyperDisk.
  357. Load HyperDisk before Windows.
  358.  
  359. HYPER386 or HYPER286 may be used for Windows and HIMEM.SYS.
  360.  
  361. HYPERDKX should be used with QEMM386, EMM386 or 386Max.
  362.  
  363. To enable the automatic release of XMS/EMS memory from the cache for Windows
  364. use, you must load Windows with the /S or /3 switches.  Having 386ENH as your
  365. default Win3 mode will not by itself enable the cache reduction.
  366.  
  367.  
  368. Loading HyperDisk high in Chips and Tech. based machines and Windows 3:
  369.  
  370. Be sure to add the appropriate EMMEXCLUDE= statement to the [386Enh] section
  371. of SYSTEM.INI.  EMMEXCLUDE=E800-EFFFF or EMMEXCLUDE=E400-EFFF will be correct
  372. depending on how much memory is used by HyperDisk.
  373.  
  374.  
  375. CAUTION:  Windows Enhanced mode provides time-sliced multitasking. If you use
  376. staged write caching, be careful with <Ctrl><Alt><Del> (Soft Reboot) when
  377. under Win3; it will restart your machine immediately without informing
  378. HyperDisk of the impending reboot, and could thus cause loss of data not yet
  379. written from the cache to the disk.  Always exit Windows or wait until the
  380. disk updates are complete before you reboot your system!
  381.  
  382.                  _______________________________
  383.  
  384.  
  385. "Load High" Users:  Packed File Corrupt Error!
  386.  
  387. If you encounter this error you should select the /OG option when you install
  388. HyperDisk. Microsoft's EXEPACK program, used to compress executable program
  389. files, has a bug that causes this error. To make these applications safe for
  390. programs using XMS High Memory Area (HMA) obtain a copy of LZEXE to unpack
  391. the application program and then optionally repack the application.  Also,
  392. please beware that some programs that have been packed using EXEPACK have been
  393. post-processed and can not be unpacked using the UNPACKER; for these you will
  394. have to contact the product producer and request an non-packed version.
  395. LZEXE is a great FREEWARE program by Fabrice Bellard, Grabels, France.
  396.  
  397.                  _______________________________
  398.  
  399.  
  400.   02/03/91  HyperDisk V4.20 release
  401.  
  402. * DOS 5.00 Upper Memory Support with /XS option.
  403.  
  404. * Added ACER A20 Gate method.
  405.  
  406. * Relax DMA boundary testing when run with 80386 EMS emulators. Allows
  407.   "Load-Hi" optimizer to load HyperDisk high.
  408.  
  409. * Enhanced LIM-EMS 4.0 level functional testing.
  410.  
  411. * Added new installations check method that uses the DOS multiplex interrupt.
  412.  
  413. * Added auto-selection for EMS 4.0 transfer mode. Falls back to EMS 3.2
  414.   when in Windows 3.0 (avoid bug in Win 3.0 EMS code).
  415.  
  416. * Now HyperDisk will release EMS memory automatically when ever you start
  417.   Windows 3.0 or Desqview 2.24+ just like SmartDrive and Windows 3.0. Use the
  418.   CW:nnn parameter described below.
  419.  
  420. * Added EMS 4.0 memory move functions. Makes EMS as safe as XMS! The EMS
  421.   memory model no longer needs to use the EMS frame to transfer data.
  422.   Use XT and XT:- in the same way as XMS. XT selects EMS 4.0  memory move
  423.   function, while XT:- selects EMS 3.2 frame access method (original).
  424.   If you select no transfer buffer (U:-) then EMS 3.2 level frame mapping
  425.   is used. Think of /XT as eXternal Transfer mode.
  426.  
  427. * Added new display field to indicate the active memory transfer method.
  428.   This field displays the last used method.
  429.  
  430. * Change EMS far call to INT 67, works better with Desqview. To restore the
  431.   original FAR CALL method specify UI:-
  432.  
  433. * Fix disabled Hotkey status report. Display format error.
  434.  
  435. * Changed Hotkey acknowledge beep to issue one beep at the beginning of
  436.   the update action and two beeps when update and flush is complete.
  437.  
  438. * Add new method to determine drive parameters. This is a complete rewite
  439.   of this facility.
  440.  
  441. * Extended Diagnostic report (/YD): display Logical volume BPB.
  442.  
  443. * Add special error handling for faulty drive controllers.
  444.  
  445. * Add No Read-Ahead mode: /NR  Allows disabling of read ahead operations
  446.   to aid in debugging faulty disk controllers. Default is Read-Ahead with
  447.   short-term disabling.
  448.  
  449. * Added: Split Shadow RAM loading (Load High) memory load. Loads code and
  450.   data tables high and leave I/O transfer buffer low; specify XSL. If you
  451.   have trouble loading HyperDisk high try this option.
  452.  
  453. * Added: Display of system access counts. Total system read/write request,
  454.   saved accesses (cached sectors) and disk accesses. Specify /YD report.
  455.  
  456. * Fixed: PS/2 A20 Gate code problem.
  457.  
  458. * Enhanced: memory limits testing, generally tighting of error conditions.
  459. * Added: DMA boundary test override /OD disables DMA boundary testing.
  460.  
  461. * Added: New stack location algorithm.
  462.  
  463. * Fixed: Problem with reallocation of maximum cache size.
  464.  
  465. * Fix HotKey lockup within Windows (introduced by V4.11)
  466.  
  467. * Combine Shadow Ram Type (Upper memory) field and program memory size
  468.   message. Revised and moved the Hotkey Shift Key field.
  469.  
  470. * Improve Windows 3.0 and Desqview resize cache logic. If you use fixed size
  471.   cache the startup and exit delays have been reduced.
  472.  
  473. * Added independent Floppy and Hard Disk verify commands. The report field has
  474.   been changed to reflect the new states. The command syntax is:
  475.  
  476.     VF, VF:+ or VF:-   Verify Floppy Write operation.
  477.         VF and VF:+ are identical and both enable verify operations. VF:-
  478.         disables the verify after write operation and is the default.
  479.  
  480.     VH, VH:+ or VH:-   Verify Hard Write operation.
  481.         VH and VH:+ are identical and both enable verify operations. VH:-
  482.         disables the verify after write operation and is the default.
  483.  
  484.     V, V:+ and V:- is still supported and affect both drive types in the
  485.         same manner as before (see HyperDisk user document).
  486.  
  487. * Revised the report panel fields combining the Hard and Floppy Staged Write
  488.   fields into one. Extended the Verify Write field status for the new verify
  489.   command.
  490.  
  491. * Modified the pause for key after "no parameter" report. After you install
  492.   HyperDisk you can obtain a status report by running HyperDk (or any other
  493.   installable HyperDisk model). If you specify no parameters HyperDisk will
  494.   pause and ask for a key after the panel is displayed. With the new KW:nn
  495.   command you can disable this pause or select a time delay before continuing.
  496.  
  497.    KW   Key Wait Time
  498.         Selects wait for key after "No Parameter" status panel. KW or KW:+
  499.         enables a pause after the status panel (default). KW:- disables the
  500.         wait for a key mode. Alternately, you may select a time delay by
  501.         specifing KW:nn, where nn is the number of seconds to wait before
  502.         continuing automatically.
  503.  
  504.                  _______________________________
  505.  
  506.   9/15/90  HyperDisk V4.11 release
  507.  
  508. *  Desqview (2.23+) API interface for Startup and Shutdown callouts, Cache
  509.    resizing on startup/exit just like SmartDrive does for Win3.  Use
  510.    C:NNNN:nnnn on the HyperDisk line in your CONFIG or AUTOEXEC, or CW:nnn
  511.    from the command line, as described below.
  512.  
  513. * Automatic XMS-A20 gate control for QEMM and 386Max. Prevents "Packed
  514.   File Corrupt" error when first 64K of conventional memory is partly used
  515.   (most DDs and TSRs loaded high) and XMS High Memory Area (HMA) is accessable.
  516.   Removes need to specify "OG" when installing HyperDisk with QEMM & 386Max.
  517.  
  518. *  Prevent conflicting configurations by detecting SMARTDrive, Fastopen or
  519.    PC-Kwik and aborting installation. Also disable cache if any of these
  520.    products are installed later and the command processor is executed.
  521.  
  522. *  Added Windows 3.0 full API critical section interface support.
  523.    Eliminates need for InDOSPolling=true switch.
  524.  
  525. *  Improved floppy error handling (Some 3.5 seek/settle problems).
  526.  
  527. *  Automatic override of OX command when no parameters are present.
  528.    Add pause for key after no parameter change report panel.
  529.  
  530.                  _______________________________
  531.  
  532.   8/20/90  HyperDisk 4.10 release and earlier releases
  533.  
  534.   Windows 3.0/386 aware version:
  535.  
  536. * Now HyperDisk can release memory in the same manner as SmartDrv, reducing
  537. the cache size when Win3 loads in Enhanced mode.  Syntax is C:NNNN:nnnn,
  538. where NNNN is cache size outside of Win3 and nnnn is cache size to use with
  539. Win3.  You may also use HYPERDK CW:nnnn from the DOS command line to set
  540. the size of cache to use while in Windows. (You must be using XMS memory to
  541. use this feature, and you must load Windows with the /3 parameter.)
  542. Examples:
  543.  
  544. In the CONFIG:
  545. DEVICE=HYPER386.EXE C:2048:512 ; Set Cache size 2Mb in DOS, 512K in Windows 3.0
  546.  
  547. From the command line (or in a batch file):
  548.   HYPERDK  CW:512              ; Set Windows 3.0 Cache size to 512
  549.   HYPERDK  CW:0                ; No Cache while in Windows 3.0
  550.  
  551. Default:
  552.   HYPERDK  CW                  ; No size change when running Windows 3.0
  553.  
  554. * The XMS-A20 gate is closed automaticlly (OG:+)
  555.  
  556. * Floppy interrupts are disabled (XIF:-).
  557.  
  558. * Upon exit from Windows the original conditions (including the original
  559.   cache size) are fully restored from the above accomodations for Win3.
  560.  
  561. * Report panel displays CW active parameter: Cache Size   : 2048:512
  562.  
  563. * Extended the Override Gate Exit (OG) function; now the A20 gate may may
  564.   be closed on exit for any gate method.
  565.  
  566.   This message has been changed to support both keystrokes and Shift
  567.   State Hotkeys. Shift state hotkeys allow entry of commands even when
  568.   the foreground application has taken normal keyboard control (i.e.
  569.   Microsoft Windows 3.0, SmartCom, et. al.). The new error message is
  570.   proceeded by three beeps and the following message:
  571.  
  572.     HyperDisk Error......... RShft: Retry=LShft Skip=Ctrl Abort=Alt?
  573.  
  574.   You can enter: R or <RShift><LShift> for RETRY; S or <LShift><Ctrl>
  575.   for SKIP; A or <RShift><Alt> for ABORT.  If no response is entered
  576.   within four seconds a RETRY is automaticlly entered for you.
  577.  
  578. * Staged write error handling has been enhanced. If a disk write update
  579.   fails, each sector is written and verified one-by-one. This insures the
  580.   minimum loss of data if the disk surface has developed a bad spot. Hard
  581.   errors are then helt in the cache until all of the writable updates are
  582.   completed; then the errors are retried and if still failing the error is
  583.   displayed and the user is prompted for the appropriate action.
  584.  
  585. *  Add new parameter to control XMS transfer mode control:
  586.  
  587.    XT   Selects XMS transfer mode in both Real and Protected mode.
  588.    XTR  Selects XMS transfer mode in Real mode.
  589.    XTP  Selects XMS transfer mode in Protected mode.
  590.  
  591.    Example: hyperdk XTR:- XTP:+   (This is the default setting)
  592.  
  593.    Used to avoid Microsoft HIMEM.SYS problems.
  594.  
  595.    Add special handling for XF command to prompt for console I/O: XF:CON
  596.    Use for Windows 3.0 PIF default command line parameters
  597.  
  598.    Some cosmetic changes to display logic:
  599.  
  600. * OX   Disable report display unless OR override applied.
  601.        OX or OX:+ disables report panel.
  602.        OX:- restores report panel display (default).
  603.        OR:- may be used to override OX setting.
  604.  
  605.  
  606.    If you are currently using 386 Max, QEMM 5.0 or have a machine
  607.    based on Chip & Technologies NEAT 210 or 300 Series chip sets
  608.    you may load HyperDisk directly in upper memory (above 640K)!
  609.  
  610.    Just add: XS to the installation command line.
  611.  
  612.    Chips and Technologies Shadow Ram users:
  613.  
  614.    If you are using an EMS system that does not support XMS's Upper Memory
  615.    Blocks (UMBs) such as EMMSYS, Windows 3.0 Intel 4.0 EMS, AST EEMS, etc.
  616.    You will need to EXCLUDE the last part of the E000 segment of memory.
  617.    Load HyperDisk first with the XS option set, examine the report panel
  618.    to (second section of the report panel) find where HyperDisk is loaded.
  619.    Next, edit your EMS device installation command line and exclude the
  620.    area from use by your EMS manager. See your EMS product installation
  621.    guide for details on excluding areas from EMS use.
  622.  
  623.    Note: Qualitas' 386MAX 4.04+ and Quarterdeck's QEMM 5.0+ directly
  624.    support XMS UMB's and require no special procedures when installing
  625.    HyperDisk with these products.
  626.  
  627.                  _______________________________
  628.  
  629.   HyperStb Pre-Install Binder for HyperDisk: 6/17/90
  630.  
  631.    A new program module HYPERSTB.EXE has been added to the HyperDisk
  632.    package.  This program allows you to install and later uninstall
  633.    HyperDisk easily and without conflict with other resident programs.
  634.    Install HYPERSTB.EXE in either your CONFIG.SYS or AUTOEXEC.BAT
  635.    files (normally in the same place as you would place the HyperDisk
  636.    install statement). Later, either near the end of the AUTOEXEC.BAT
  637.    or from the command line you may install HyperDisk. HYPERSTB's function
  638.    is to reserve the resources for HyperDisk, preventing other resident
  639.    programs installed later from conflicting with HyperDisk. HYPERSTB
  640.    requires approximately 400 bytes!
  641.  
  642.  
  643.    Example:
  644.  
  645.    device=c:hyperstb.exe
  646.  
  647.  
  648.    No parameters are needed!
  649.  
  650.  
  651.   +++++++++++++++++++++++++++++++++++++++++++++++++++
  652.  
  653.   ___________ HyperKey Release Changes______________
  654.  
  655.   01/09/91  HyperKey V4.15 release
  656.  
  657. * Fix problem with Touch Shifting (TM).
  658.  
  659.   11/04/91  HyperKey V4.14 release
  660.  
  661. * There is a problem in Windows 3.0 with using INT 15-83 functions.
  662.   This release does not repeat evenly when executing DOS programs under
  663.   Windows 3.0 enhanced mode. We hope to find a work-around soon!
  664.  
  665. * Fix keyboard shift state and function key problem with
  666.   new Keyboard Processors.
  667.  
  668. * Fix lockup problem when entering <ALT><2><4><0> extended character code.
  669.  
  670. * Added Windows specific option: /W:+ or /W enables HyperKey while in Windows
  671.   (default), /W:- disables HyperKey while Windows 3.0 is active.
  672.  
  673.   04/22/91  HyperKey V4.12 release
  674.  
  675. * Add new method to detect if HyperKey is installed using the DOS Multiplex
  676.   interrupt (INT 2F).
  677.  
  678. * Add detection of End Of File (EOF) mark in command files (/XF:file).
  679.   Fixes problem with WordStar text files.
  680.  
  681. * Add timeout TouchShift (tm) keys after 3 seconds.
  682.  
  683. * Improve C&T ShadowRam detection logic.
  684.  
  685. * Fixed no "Key Click" problem when using foreign keyboard support.
  686.  
  687. * Fixed problem with not recognizing C&T Chip Sets.
  688.  
  689. * Ready HyperKey for Shareware
  690.  
  691. * Add DOS 5.00 High Memory Support with /XS option.
  692.  
  693. *  Automatic override of OX command when no parameters are present.
  694.    Add pause for key after no parameter change report panel.
  695.  
  696. *  Added Windows 3.0 full API interface support.
  697.  
  698. * Combine Shadow Ram Type (Upper memory) field and program memory size
  699.   message.
  700.  
  701. * Modified the pause for key after "no parameter" report. After you install
  702.   HyperDisk you can obtain a status report by running HyperDk (or any other
  703.   installable HyperDisk model). If you specify no parameters HyperDisk will
  704.   pause and ask for a key after the panel is displayed. With the new KW:nn
  705.   command you can disable this pause or select a time delay before continuing.
  706.  
  707.    KW   Key Wait Time
  708.         Selects wait for key after "No Parameter" status panel. KW or KW:+
  709.         enables a pause after the status panel (default). KW:- disables the
  710.         wait for a key mode. Alternately, you may select a time delay by
  711.         specifing KW:nn, where nn is the number of seconds to wait before
  712.         continuing automatically.
  713.  
  714.   +++++++++++++++++++++++++++++++++++++++++++++++++++
  715.  
  716.   ___________ HyperScreen Release Changes______________
  717.  
  718.   01/20/92  HyperScreen V4.19 release
  719.  
  720. * Fixed Hotkey only blanking and delete key on Redisplay problems.
  721.  
  722. * Added mouse motion counter (Function 11) deblanking detection.
  723.  
  724.   01/13/92  HyperScreen V4.18 release
  725.  
  726. * Add delete key when deblanking screen. Add /D to the installation line.
  727.   D:- default.
  728.  
  729.   11/05/91  HyperScreen V4.17 release
  730.  
  731. * Fix problem with EMM386 reboot lockup.
  732.  
  733.   11/04/91  HyperScreen V4.16 release
  734.  
  735. * Add internal INT 10 stack to prevent overflows with Windows 3.0 exit.
  736.   Disable stack switching when DesqView is running.
  737.  
  738. * Fix keyboard shift state and function key problem with new 101 Keyboard
  739.   Processors.
  740.  
  741. * Fix lock on some Hercules clone cards.
  742.  
  743. * Fix K:- switch to agree with documentation.
  744.  
  745. * Add deblanking when HYPERSCR executes.
  746.  
  747. * Added Windows specific option: /W:+ or /W enables HyperScreen while in
  748.   Windows (default), /W:- disables HyperScreen while Windows 3.0 is active.
  749.   06/03/91  HyperScreen V2.14 release
  750.  
  751. * Fix deblanking problem while using Word Perfect Calender.
  752.  
  753.   04/29/91  HyperScreen V2.13 release
  754.  
  755. * Fix problem with Hotkey only deblanking.
  756.  
  757.   04/22/91  HyperScreen V2.12 release
  758.  
  759. * Change blanking timer to use BIOS time-of-day timer.
  760.  
  761. * Fix Monochrome blanking problem. Regression error.
  762.  
  763. * Add new method to detect if HyperScreen is installed using the DOS Multiplex
  764.   interrupt (INT 2F).
  765.  
  766. * Add detection of End Of File (EOF) mark in command files (/XF:file).
  767.   Fixes problem with WordStar text files.
  768.  
  769. * Add new command options:
  770.  
  771.       C     SET and LOCK CURSOR SIZE
  772.             For some LCD type displays the cursor is difficult to see.
  773.             C paramter allows you to set and lock a fixed cursor size.
  774.             Three sizes are available Large, Medium and Small each denoted
  775.             by l, m or s. Once the size is selected you may lock the value
  776.             permanently. C or C:+ locks the cursor, C:- unlocks the cursor.
  777.  
  778.             Example: hyperscr c:m:+  Sets a medium cursor and locks it.
  779.             Example: hyperscr c:s:-  Restore the small cursor and unlock it.
  780.  
  781.  
  782.    CC       SET and LOCK COLOR CURSOR SIZE
  783.             Same as C but affects only the color display. Useful for dual
  784.             display systems.
  785.  
  786.    CM       SET and LOCK MONOCHROME CURSOR SIZE
  787.             Same as C but affects only the monochrome display. Useful for
  788.             dual display systems.
  789.  
  790.